Subcategories
Suitable for roof drains from D75 to D125 Manufacturer: ITALPROFILI s.r.l. (Italy)Production standard: ISO 9001: 2015 and ISO 14001 Suitable for roof drains from D75 to D125 Manufacturer:...
The inlet SURE FIX is intended for draining rainwater through an internal rainwater drainage system. Reliable mechanical fastening with an aluminum ring allows installation with almost all roof coverings. The inlet SURE FIX is intended for draining rainwater through...
The inlet SURE FIX is intended for draining rainwater through an internal rainwater drainage system. Reliable mechanical fastening with an aluminum ring allows installation with almost all roof coverings. The inlet SURE FIX is intended for draining rainwater through...
The inlet SURE FIX is intended for draining rainwater through an internal rainwater drainage system. Reliable mechanical fastening with an aluminum ring allows installation with almost all roof coverings. The inlet SURE FIX is intended for draining rainwater through...
The inlet SURE FIX is intended for draining rainwater through an internal rainwater drainage system. Reliable mechanical fastening with an aluminum ring allows installation with almost all roof coverings. The inlet SURE FIX is intended for draining rainwater through...
Suitable for roof drains from D75 to D125 Manufacturer: ITALPROFILI s.r.l. (Italy)Production standard: ISO 9001: 2015 and ISO 14001 Suitable for roof drains from D75 to D125 Manufacturer:...
The inlet TOP DRAIN is intended for draining rainwater through an internal rainwater drainage system. The recess is for overlapping roofs. Mechanical fastening allows installation with almost all roof coverings. The inlet TOP DRAIN is intended for draining rainwater through...
The inlet TOP DRAIN is intended for draining rainwater through an internal rainwater drainage system. The recess is for overlapping roofs. Mechanical fastening allows installation with almost all roof coverings. The inlet TOP DRAIN is intended for draining rainwater through...
The spring for the hose is designed to prevent the hose from twisting during burning. Twisting the hose can make the torch unstable, so a spring is a must. Its measurements: 8x15mm. The spring for the hose is designed to prevent the hose from...
This enables the torch to be places down with the bell head facing upwards in order to avoid the contact ot the flame with the surface to be heated. This enables the torch to be places down with the bell head...